No communication between Airleader control and compressors.

Check the wiring. Check the bus addresses on communication modules. If the communication is bridged over the Ethernet network (FL-COM Server) check and increase the response time (Code 111111).

Can we have more than 2 FU Compressors on one Airleader control?

The Airleader Mastermodul / CN can handle up to 4 FU compressors with additional software. Contact our technician for more information and costs.

How can I compensate for pressure differences?

With Airleader Mastermodul / CN it is possible to handle up to 3 pressure sensors, mounted on different places inside the system, to get an average of all sensors as pressure value to control the Airleader. For every pressure sensor, a divergence value can be set. If the pressure exceeded the divergence value, this sensor will not be included in the calculation.

Actual pressure on system and FU differ. Can i get the system pressure for the FU compressor?

With Airleader Mastermodul / CN it is possible to send the system pressure to the FU compressors. The system pressure can get from the AO connector of the communication module as 4-20mA signal. Offsets can be programmed in the controller.

New compressor installed but not visible in OPC Server.

With such changes, it is necessary to restart the OPC server, because the OPC Server reads it’s configuration only on startup. Please disconnect all client connections before restarting the OPC Server.

Webbrowser shows other website after installation of WebServer.

The cause for this issue is the security setting of Windows 7, which does not allow script-based installation of windows services. For the installation, it is necessary to turn off the UAC (user account control). In some cases, you have to reboot your machine. After turning off the UAC, the installation process should run correctly.

Panel shows up communiation error

This issue can have many causes. First, you should check the availability of the control in the network through a PING. This can be done in the “Diagnostics” area. If the PING is successful, it should be checked whether the IP address of the controller may have been assigned more than once. If this is not the case, the issue can be triggered by the internal memory card of the controller. For that, the SD card should be initialized. The procedure for initializing is described in the operating manual.

Airleader doesn’t store the values sending from WebServer?

Key switch “Prog” must be set to “Off”. Have you entered the correct WebServer Plus code?

Why is the web server accessible only on the server machine?

Maybe the incoming requests are blocked by the servers firewall. Make sure that the firewall is passing incoming traffic on port 80.

Old software version after updating

Before installing a new software version, you have to deinstall the previous version. Take care that you remember the controllers ip-adress and the data path. As from Version 3.000 or higher, there is an online updater included, which can be used to update the system on the fly. For the online update, an internet connection must be available.

Are You Ready To Maximize Efficiency? Check Out Airleader’s Monitoring Solutions!

In an industrial environment, data is your most powerful ally. Web-based access to compressed air systems enables you to monitor performance metrics in real-time. This immediacy provides a clear picture of your operational efficiency, allowing you to identify inefficiencies as they arise. A study by the U.S. Department of Energy highlights that organizations can save up to 30% on energy costs by optimizing their compressed air systems.

Implementing data-driven decision-making through Advanced Airleader Compressed Air Solutions allows you to harness real-time insights, leading to optimized operations and cost savings. The ability to monitor and analyze your compressed air systems online can transform how you manage your resources. By using such solutions, you gain the capability to act swiftly on data insights, ultimately maximizing efficiency and reducing expenses.

Customizable Dashboards for Easy Monitoring

With Airleader’s intuitive web platform, you can customize your dashboard to display the metrics most relevant to your operations. This flexibility allows you to focus on key performance indicators (KPIs) such as pressure levels, energy consumption, and system leaks. By having all essential information at your fingertips, you can make informed decisions that drive improvements in your compressed air management.

Streamlined Compliance and Reporting

For regulatory compliance officers, having accurate and accessible data is crucial. Airleader’s web-based access simplifies compliance reporting by providing readily available metrics that demonstrate adherence to industry standards. This level of transparency not only helps in audits but also fosters a culture of accountability within your organization.

Predictive Analytics for Proactive Management

Leveraging predictive analytics is another powerful feature of Advanced Airleader Compressed Air Solutions. Instead of waiting for problems to occur, predictive analytics analyzes historical data to forecast potential issues. This proactive approach allows you to address maintenance needs before they disrupt operations. By anticipating failures, you can minimize downtime and extend the lifespan of your equipment.

Enhanced Collaboration Across Teams

With web-based access, your team members, from plant managers to engineers, can collaborate more effectively. Data can be shared in real time, enabling everyone to work with the same information. This cohesion allows for faster decision-making and improved problem-solving, ensuring that your operations run smoothly and efficiently.

Cost Efficiency Through Optimization

Ultimately, the goal of leveraging data-driven decision-making is to achieve cost efficiency. The insights provided by Advanced Compressed Air Solutions enable you to identify areas where you can cut costs and streamline operations. According to the Compressed Air Challenge, companies that optimize their compressed air systems can save up to $30,000 annually. By investing in Airleader’s solutions, you’re not only improving your operational efficiency but also significantly impacting your bottom line.

Conclusive Words: Your Competitive Edge in the Market

In the ever-evolving industrial landscape, making informed decisions based on reliable data can set you apart from competitors. Advanced Airleader Compressed Air Solutions provides the tools necessary to optimize your operations, enhance compliance, and foster collaboration.

By embracing data-driven decision-making, you position your organization for sustainable growth and efficiency. Don’t let inefficiencies drain your resources—utilize Airleader’s web-based access to unlock the full potential of your compressed air systems. Characteristically dedicated to improving industrial performance through advanced data capture and monitoring solutions, Airleaders‘ suite of products ensure reliable system operations while maintaining critical air quality, helping businesses thrive in a competitive landscape.