No communication between Airleader control and compressors.

Check the wiring. Check the bus addresses on communication modules. If the communication is bridged over the Ethernet network (FL-COM Server) check and increase the response time (Code 111111).

Can we have more than 2 FU Compressors on one Airleader control?

The Airleader Mastermodul / CN can handle up to 4 FU compressors with additional software. Contact our technician for more information and costs.

How can I compensate for pressure differences?

With Airleader Mastermodul / CN it is possible to handle up to 3 pressure sensors, mounted on different places inside the system, to get an average of all sensors as pressure value to control the Airleader. For every pressure sensor, a divergence value can be set. If the pressure exceeded the divergence value, this sensor will not be included in the calculation.

Actual pressure on system and FU differ. Can i get the system pressure for the FU compressor?

With Airleader Mastermodul / CN it is possible to send the system pressure to the FU compressors. The system pressure can get from the AO connector of the communication module as 4-20mA signal. Offsets can be programmed in the controller.

New compressor installed but not visible in OPC Server.

With such changes, it is necessary to restart the OPC server, because the OPC Server reads it’s configuration only on startup. Please disconnect all client connections before restarting the OPC Server.

Webbrowser shows other website after installation of WebServer.

The cause for this issue is the security setting of Windows 7, which does not allow script-based installation of windows services. For the installation, it is necessary to turn off the UAC (user account control). In some cases, you have to reboot your machine. After turning off the UAC, the installation process should run correctly.

Panel shows up communiation error

This issue can have many causes. First, you should check the availability of the control in the network through a PING. This can be done in the “Diagnostics” area. If the PING is successful, it should be checked whether the IP address of the controller may have been assigned more than once. If this is not the case, the issue can be triggered by the internal memory card of the controller. For that, the SD card should be initialized. The procedure for initializing is described in the operating manual.

Airleader doesn’t store the values sending from WebServer?

Key switch “Prog” must be set to “Off”. Have you entered the correct WebServer Plus code?

Why is the web server accessible only on the server machine?

Maybe the incoming requests are blocked by the servers firewall. Make sure that the firewall is passing incoming traffic on port 80.

Old software version after updating

Before installing a new software version, you have to deinstall the previous version. Take care that you remember the controllers ip-adress and the data path. As from Version 3.000 or higher, there is an online updater included, which can be used to update the system on the fly. For the online update, an internet connection must be available.

Streamline Your Compressor Audits: How The Airleader Data Logger Ensures Compliance?

When was the last time you conducted a compressor audit that met all local, national, and international standards seamlessly? According to a report by Compressor World, over 60% of businesses face challenges in maintaining compliance during compressor audits. This can cause delays, increased costs, and inefficient operations. With a tool like the Airleader Data Logger for Audits, you can streamline the process, ensuring your compressors meet required standards with minimal hassle.

Streamlining Compliance with Precision

Ensuring your compressor system complies with various regulations is often time-consuming and complex. This data logger simplifies this process by automatically collecting and storing the necessary data required for compliance checks. Whether it’s local, national, or international standards, this tool ensures your system’s performance is accurately monitored, making the audit process quicker and more effective.

Data Accuracy for Better Decision Making

Inaccurate data can lead to compliance failures and costly errors. A data logger eliminates this risk by capturing precise, real-time data on pressure, temperature, and energy usage. This data is essential for meeting air quality control requirements and demonstrates system efficiency during audits. According to ISO 11011:2013, maintaining accurate compressor system data is crucial for ensuring safety and performance during audits.

Reduce Audit Time with Automation

Gone are the days of manually recording data and sorting through piles of paperwork. With the Airleader Data Logger for Audits, you can automate data collection, reducing the amount of time spent on audits. This tool seamlessly integrates into your compressor management system, delivering the necessary information in an easy-to-understand format. Automation makes audits smoother and reduces human errors, saving both time and money.

Adapt to Global Standards Effortlessly

Navigating through different compliance standards across various regions can be challenging. This is designed to help you meet global standards without additional effort. Whether you’re dealing with the European Union’s EN 12021 or the United States’ OSHA standards, this tool simplifies the process. By providing detailed performance data, it helps your business stay compliant with international requirements.

Supporting Sustainability and Efficiency Goals

As companies increasingly prioritize sustainability, energy efficiency, and air quality control, a data logger for compressed air audit helps achieve these goals by offering detailed insights into energy usage. It assists in monitoring your compressors’ performance, identifying inefficiencies, and suggesting improvements. This not only helps you stay compliant but also supports your organization’s broader sustainability and cost-reduction initiatives.

Meeting Industry-Specific Requirements

Different industries have unique compliance requirements when it comes to compressor systems. With Airleader’s data loggers, which are flexible and can be configured to meet specific industry standards, whether you’re in manufacturing, healthcare, or food processing. With this tool, you can ensure that your compressor management system aligns with the necessary regulations, reducing the risk of costly non-compliance penalties.

Parting Note

By using the Airleader Data Logger for Audits, you can make your compressor audits more efficient, accurate, and compliant with the relevant standards. This tool simplifies the complexities of maintaining compliance, reduces audit time, and supports your business’s sustainability goals. Don’t let complex regulations slow down your operations—opt for a solution that enhances your auditing process and ensures a hassle-free experience.