No communication between Airleader control and compressors.

Check the wiring. Check the bus addresses on communication modules. If the communication is bridged over the Ethernet network (FL-COM Server) check and increase the response time (Code 111111).

Can we have more than 2 FU Compressors on one Airleader control?

The Airleader Mastermodul / CN can handle up to 4 FU compressors with additional software. Contact our technician for more information and costs.

How can I compensate for pressure differences?

With Airleader Mastermodul / CN it is possible to handle up to 3 pressure sensors, mounted on different places inside the system, to get an average of all sensors as pressure value to control the Airleader. For every pressure sensor, a divergence value can be set. If the pressure exceeded the divergence value, this sensor will not be included in the calculation.

Actual pressure on system and FU differ. Can i get the system pressure for the FU compressor?

With Airleader Mastermodul / CN it is possible to send the system pressure to the FU compressors. The system pressure can get from the AO connector of the communication module as 4-20mA signal. Offsets can be programmed in the controller.

New compressor installed but not visible in OPC Server.

With such changes, it is necessary to restart the OPC server, because the OPC Server reads it’s configuration only on startup. Please disconnect all client connections before restarting the OPC Server.

Webbrowser shows other website after installation of WebServer.

The cause for this issue is the security setting of Windows 7, which does not allow script-based installation of windows services. For the installation, it is necessary to turn off the UAC (user account control). In some cases, you have to reboot your machine. After turning off the UAC, the installation process should run correctly.

Panel shows up communiation error

This issue can have many causes. First, you should check the availability of the control in the network through a PING. This can be done in the “Diagnostics” area. If the PING is successful, it should be checked whether the IP address of the controller may have been assigned more than once. If this is not the case, the issue can be triggered by the internal memory card of the controller. For that, the SD card should be initialized. The procedure for initializing is described in the operating manual.

Airleader doesn’t store the values sending from WebServer?

Key switch “Prog” must be set to “Off”. Have you entered the correct WebServer Plus code?

Why is the web server accessible only on the server machine?

Maybe the incoming requests are blocked by the servers firewall. Make sure that the firewall is passing incoming traffic on port 80.

Old software version after updating

Before installing a new software version, you have to deinstall the previous version. Take care that you remember the controllers ip-adress and the data path. As from Version 3.000 or higher, there is an online updater included, which can be used to update the system on the fly. For the online update, an internet connection must be available.

Why Are Data Loggers The Secret Weapon For Industrial Efficiency?

Compressed air systems are vital to various industrial operations, but they are also among the most expensive utilities to run. They often operate inefficiently, leading to increased energy costs and wasted resources. According to the U.S. Department of Energy, poorly managed compressed air systems can account for up to 30% of a facility’s energy consumption. By engaging in regular audits, you can uncover these hidden costs and initiate impactful changes. Partnering with an expert Compressed Air Audits Data Logger Provider can streamline this process, providing precise measurements and insights into your compressed air system’s performance.

Why Are Data Loggers Game Changers?

Data loggers are essential tools that collect, monitor, and analyze performance metrics from your compressed air systems. They provide real-time data on critical factors such as pressure fluctuations, flow rates, and energy consumption. With this information, you can pinpoint inefficiencies and take corrective actions before they escalate.

Why to collaborate with data logger providers?

Expertise and Knowledge

When you collaborate with a specialized provider, you gain access to a team of experts who understand the nuances of compressed air systems. They offer tailored solutions that align with your specific operational needs. This expertise is invaluable in identifying critical issues that might be overlooked by general providers.

Proactive Maintenance

One of the significant advantages of utilizing a data logger is the ability to engage in proactive maintenance. By continuously monitoring your compressed air system, you can identify potential issues before they escalate into costly repairs or downtime. This proactive approach not only saves money but also enhances overall system reliability.

Enhanced Accuracy

Specialized data loggers are designed to deliver high-precision measurements. This accuracy is crucial for making reliable assessments and implementing effective changes. A Michigan Compressed Air Data Logger Manufacturer will ensure that the data you receive is consistent and trustworthy, allowing for informed decision-making.

Cost Savings

Ultimately, the goal of any operational enhancement is to reduce costs. By optimizing your compressed air systems through effective audits and data analysis, you can significantly lower energy bills and reduce wastage. A study by the Compressed Air Challenge indicates that businesses can save up to $30,000 annually by addressing inefficiencies in their compressed air systems.

Compliance and Reporting

Regulatory compliance is a critical aspect of industrial operations. A specialized Compressed Air Audits Data Logger Provider ensures that your systems meet relevant regulations. The data gathered can be invaluable for reporting and compliance purposes, providing the necessary documentation to satisfy regulatory bodies. In this regard, Airleader can be your all-time guide! Thanks to its diverse range of products that captures the performance data and even air quality, Airleader truly leads this compressor management market.

Parting Words

In an era where every dollar counts, investing in a special Compressed Air Audits Data Logger Provider is a strategic move for any industrial plant manager or regulatory compliance officer. The benefits of enhanced data accuracy, expert insights, and cost savings make this partnership a valuable asset.

By embracing this collaboration, you position your organization to thrive in a competitive environment, ensuring that your compressed air systems operate at peak efficiency while adhering to necessary compliance standards. Optimize your operations today and see the tangible results that come from informed decision-making and expert partnerships.